SURGICAL SET
The ImplatechOne surgical cassette is made of a material called Radel®, which is resistant to high temperature and pressure and has international medical certifications. This material, which is compatible with sterilization conditions and repeated use, does not corrode and can be cleaned very easily.
Both surgical sets include all kinds of equipment you may need during the operation. You can transfer the implant to the implant site you prepared, either by hand, with a ratchet, or with your implant motor. The longer hand driver, which enhances success and ease of use, provides more comfort to dentists, especially when working on lower quality (D3-D4) bones in the maxillary area.
The ratchet design, which stands out with its special monoblock production with titanite coating, allows for easy cleaning and safe use and can meet high sterilization conditions.
Ref 22.10.10.10
Ref 22.10.10.11
IMPLANT DRILLS AND PARALLEL PINS
| LANCE DRILL | |
| REF. | |
 |
22.01.01.00 |
| DRILL EXTENDER | |
| REF. | |
 |
22.06.01.01 |
| Ø2 mm PILOT DRILLS (With Stoppers) | ||
| REF. | ||
 |
L: 6 mm | 22.10.20.06 |
| L: 8 mm | 22.10.20.08 | |
| L: 10 mm | 22.10.20.10 | |
| L: 11,5 mm | 22.10.20.11 | |
| L: 13 mm | 22.10.20.13 | |
| IMPLANT DRILLS | ||
| REF. | ||
 |
Ø 2.4 / 2.8 | 22.01.28.01 |
| Ø 2.8 / 3.2 | 22.01.33.01 | |
| Ø 3.2 / 3.6 | 22.01.37.01 | |
| Ø 3.6 / 4.0 | 22.01.41.01 | |
| Ø 4.0 / 4.5 | 22.01.47.01 | |
| PARALLEL PINS | ||
| REF. | ||
 |
Ø 2.0 | 22.04.20.01 |
| Ø 3.3 | 22.04.33.01 | |
| Ø 3.7 | 22.04.37.01 | |
| Ø 4.1 | 22.04.41.01 | |
| Ø 4.7 | 22.04.47.01 | |
The drills produced with Carbon and Titanite coating technology prevent corrosion compared to drills produced from different raw materials, and by reducing the friction coefficient, this coating increases sharpness and surface hardness. While these advantages extend the life of the drill, it also prevents micro-necrosis areas that may occur in preparation sites where drills contact the bone.
HARD BONE DRILLS
| COUNTERSINK | ||
| REF. | ||
 |
Ø 3.3 | 22.03.33.01 |
| Ø 3.7 | 22.03.37.01 | |
| Ø 4.1 | 22.03.41.01 | |
| Ø 4.7 | 22.03.47.01 | |
| BONE TAPS | ||
| REF. | ||
 |
Ø 3.3 | 22.02.33.01 |
| Ø 3.7 | 22.02.37.01 | |
| Ø 4.1 | 22.02.41.01 | |
| Ø 4.7 | 22.02.47.01 | |
Depths are indicated by the laser marking method on this black coating surface. While depth lines can be seen very clearly on the coating, pilot are designed with stoppers for safe and easy surgery.
SURGICAL SET TOOLS
| IMPLANT DRIVERS | |||
| REF. | |||
 |
 |
Implant Driver NP Long |
22.05.10.02 |
|
 |
Implant Driver NP Short |
22.05.10.01 |
 |
 |
Implant Driver RP Long |
22.05.20.02 |
|
 |
Implant Driver RP Short |
22.05.20.01 |
| ADAPTORS | |
| REF. | |
 |
22.05.40.01 |
| SCREW DRIVERS | ||
| REF. | ||
 |
Screw Driver for Ratchet Extra Long |
22.05.30.04 |
 |
Screw Driver for Ratchet Long |
22.05.30.02 |
 |
Screw Driver for Ratchet Short |
22.05.30.01 |
 |
Screw Driver for Angle Druva |
22.05.30.03 |
| TORQUE RATCHET | |
| REF. | |
 |
22.06.01.11 |
| HANDLE IMPLANT DRIVER | |
| REF. | |
 |
22.06.02.12 |